German pool EFB-PCTH - Getting Started

P.1 2 P.13
Operating Instructions Operating Instructions
Function Button Description
On/Off
• In Standby Mode, press once to turn on product.
• When product is operating, press once and product
will turn off and return to Standby Mode.
UV-C
Sterilization
• Press once to turn on UV-C Sterilization Function.
• Press again to turn off UV-C Sterilization Function
(Otherwise, UV Sterilization Function will automatically
turn off after operating for 1 hr).
Oscillation
• Press once to turn on Oscillation Function, oscillation
angle is 80°±5°.
• Press again to turn off Oscillation Function.
Timer
Mode
• Press this button to set Countdown To Turn Off Time
(1-8 hr). When countdown completes, the product will
automatically stop operating.
• If user wishes to restart product, please press
.
Sleep
Mode
• Press once to enter Sleep Mode; LED Display will show
“LL”, and airflow will decrease to the lowest level.
• Press again to exit Sleep Mode.
Warm Air
Mode
• Press once to switch to Warm Air Mode.
• In Warm Air Mode, LED Display lights up in orange.
• In Warm Air Mode, press +/- to adjust temperature
from 1-30°C.
• In Cool Air Mode, this button does not respond.
• Press + to increase airflow; press – to decrease
airflow.
• Warm Air Mode has 4 levels of airflow.
Cool Air
Mode
• Press once to switch to Cool Air Mode.
• In Cool Air Mode, LED Display lights up in blue.
• Press + to increase airflow; press – to decrease
airflow.
• Cool Air Mode has 9 levels of airflow.
Remote Control Remote Control Functions
Attention:
1. The Remote Control should be pointed directly at the Signal Receiver
on the Display Panel to maximize remote control reception.
2. This product may respond to the remote control of other devices.
3. Other products may respond to this Remote Control. This is due to
overlapping frequencies of the remote controls. There is no quality
problem in the product itself. To avoid interference, keep this Remote
Control away from other electrical devices during operation.
4. The On/Off button on the Remote Control does not completely
disconnect the power supply to this product. If product will be unused
for a prolonged period of time, please unplug the power cord from
the socket.
UV-C
Oscillation Button
On/O Button
T° Adjust Button Airow Adjust Button
Warm Air Mode Button Cool Air Mode Button
T° Adjust Button Airow Adjust Button
Sleep Mode Button
UV-C Sterilization Button
Timer Button