P.16 P.17
Cleaning & Maintenance Cleaning & Maintenance
UV-C
Plasma
UVC
Storage
• After cleaning the product, put in plastic bag and store away.
• Please avoid storing in a place with vibration (car trunk) or a place heated or
cooled by another appliance.
• Please avoid placing it in direct sunlight or in a hot and humid environment.
• Please keep this product out of reach of young children.
Product Surface
• When cleaning the product, do not wet or splash water on the product, to
avoid water entering inside and causing malfunction.
• Do not use banana oil, benzine, alcohol, bleach or metal objects to wipe
the surface of the product, which may damage the surface or cause
discoloration.
• Please use soft dry cloth to lightly wipe the surface of the product.
• If the surface is very dirty, use a soft cloth and diluted mild detergent to
clean, then wipe dry with a soft dry cloth.
Air Inlet & Air Outlet
Use a soft brush or vacuum cleaner to regularly clean off any dust accumulated
on the Air Inlet and Outlet. Do not let dust build up as too much dust will reduce
the efficiency of the product.
Remote Control
Gently wipe the surface of the Remote Control with a soft dry cloth. If the Remote
Control will not be used for a prolonged period of time, please remove the battery
inside to avoid battery consumption.
Power Plug
Use soft dry cloth to clean the power plug.
To Next Page
Loading...