German pool GPU Series - Product Features

不銹鋼內膽
Stainless Steel
Inner Tank
採用長期耐高溫及受高壓容器專用之日本特殊不銹鋼製造，內膽結構堅
固，保證防銹、耐壓及不受水質侵蝕。
Constructed of Japanese heavy gauge stainless steel, specially made for
high temperature and pressure applications. It is durable and free of rust,
corrosion, deformity and hassle.
保溫
Thermal Insulation
完密噴注式保溫層，採用高密度合成樹脂纖維絕熱法保持溫度，失溫程度
達至最低，保持熱水溫度。
Maximum thermal insulation is achieved by high-density polyurethane foam
injection moulded between the inner tank and outside casing.
發熱管
Heating Element
原廠優質不銹鋼發熱管，備有不同功率及電壓，符合不同熱水要求。
Prime quality stainless steel heating element ensures maximum thermal
efciency even in places where different power rating / voltage applices.
來水要求
Water Supply Source
直接自來水供應或水箱供應均可。
Main supply or water tank supply.
額定壓力 / 最大來水壓力
Rated Pressure /
Max. Inlet Water Pressure
1.0 MPa / 0.6 MPa
超溫/超壓感應排放閥
Pressure & Temperature
Relief Valve
水溫達90℃或 水壓至1MPa 時，超溫/超壓感應排放閥門會自動打開。
When water temperature reaches 90°C, or water pressure reaches 1MPa,
water will be released through the Temperature Relief Valve.
溫度調節/超溫斷路器
Combined Thermostat /
Cutout
溫度調節/超溫斷路器自動恆溫，保持水溫在預調溫度，節省能源，超溫自
動斷路確保安全，並配合個人使用熱水的習慣。
Combined Thermostat/Cut-Out provides automatic temperature control at
preset temperature to accommodate individual bathing habits and save
energy; built-in thermal cut-out ensures safety.
防水等級
Water Resistance
IPX4
符合規格
Conformity
機電工程署電氣產品（安全）條例。
Electrical Product (Safety) Regulation, Hong Kong.
認證標準
Certications
IEC 60335-1
IEC60335-2-21
P.5
德國寶GPU系列中央儲水式電熱水器採用先進科
技及根據國際標準（IEC）生產而成，同時可接
駁多個出水位使用，符合世界所有國家有關之安
全標準及水務條例。除設有地線防止漏電外，更
配備「五重保險裝置」，確保安全：
•自動恆溫設備
•超溫斷路設備
•超溫感應排放閥
•超壓感應排放閥
•防倒流裝置
產品特點 Features
German Pool GPU Series Central Storage Electric Water
Heater is designed for multi-point application. It conforms to
the Standards of International Electro-technical Commission
(IEC Standards) and complies with safety standards and
waterworks regulations worldwide. GPU is built-in with
“5-Tier Safety Device” for absolute safety:
• Automatic Thermostatic Control
• Thermal Cutout
• Temperature Relief Valve
• Pressure Relief Valve
• Anti-Back Syphon Device
*
正常情況下，如供水系統之來水水壓超過0.6 MPa，用戶必須額外加裝減壓器將水壓調低。
如來水壓力超過0.6 MPa 而用戶未有安裝減壓器，本公司有權拒絕為熱水器進行任何維修。
* Under normal working conditions, incoming pressure should not exceed 0.6 MPa. Otherwise, a separate pressure control device is necessary.
When incoming water pressure exceeds 0.6 MPa, German Pool will not provide any repair service until a pressure control device is installed.