23
2) Fill grooves of multigrooved bottom gasket with silicone grease (can or jar
supplied).
3) Lower into cabinet making sure that the arrow and the silicone filled gasket is
facing down.
4) Reassemble using reverse procedures to Section A above.
C. Installation Exhaust Filter
1) Examine for possible damage.
2) Fill both multigrooved gaskets (on both top and bottom for exhaust filter)
with silicone grease and replace making sure the arrow on the side is pointing
upward.
3) Replace the connecting collar on top of the filter.
4) Reconnect motor and speed control.
5) Replace all top screws and tighten securely.
To Next Page
Loading...
