Any size bag can be attached to the outside of the Discharge Tube. The bag must be of
proper strength and material to be compatible with discharge waste. Attach the bag to the
tube with a rubber band and/or tape and make sure the bag is supported.
A Stainless Steel Garbage Can is available as an option. Never fill the bag completely full;
allow enough space to seal.
To remove the bag, first cap the Discharge Tube from inside the work area; next, twist or
constrict the bag below the Discharge Tube; then clamp shut this area with tape or plastic
wire ties. After the bag is sealed it can be detached from the Discharge Tube. This method
of bag removal should be used for contaminated items.
27
To Next Page
Loading...
