ULTIMA series ULTIMA series WASHERS
NU_ULTIMA_02_EN_1612 12
4. SAFETY ADVICES
This apparatus, dedicated to an industrial use, has been developed to wash and dry glassware, labware in the chemistry,
microbiology, quality control and analytical laboratories …
This washer must be used under the normal conditions of operation in conformity
with the instructions manual of the manufacturer
We decline any responsibility and guarantee in the event of non-respect of these
recommendations which can involve body or material damages
Use only cleaning products designed for use in laboratory glassware washers.
If you pretreat items to be cleaned with solvents or other cleaning agents, ensure that they have been purged
from the items to be cleaned and allow potentially harmful or flammable fumes to dissipate before placing them in
the apparatus.
In the same way, it is strongly recommended not to use solvents or aerosols near the apparatus.
If incidents occur and you cannot solve those using solutions that we recommend you, do not hesitate to contact
GETINGE LANCER technical assistance service.
4.1 PRECAUTIONS FOR USE
BURN RISK IF THE DOOR IS OPENED OVER 60°C.
AT THE END OF THE CYCLE, LET THE SUPPORTS, BASKETS, ACCESORIES
AND WASHED OBJECTS COOL BEFORE HANDLING THEM.
BURN RISK if the door is opened over 60°C.
At the end of the cycle, if the temperature is over 60°C a preventive message appears on the screen.
A cold ventilation at the end of the cycle can be programmed to avoid the risk.
To Next Page
Loading...
Need help?
General
