Getinge Lancer Ultima Series User Manual

ULTIMA series MAINTENANCE OF THE WASHER
NU_ULTIMA_02_EN_1612 60
6. SHUT DOWN AT END OF DAY
a) SHUT OFF THE WATER INLET VALVES so that the lines are not left pressurised. Do not forget to open them again
before using the washer.
b) SHUT DOWN THE APPLIANCE.
7. PREVENTIVE MAINTENANCE
GETINGE LANCER’S TECHNICAL ASSISTANCE SERVICE recommends to carry out a preventive maintenance action
every year in order to guarantee the validity of the washing cycles and to ensure the operation of the washer.
The preventive maintenance reduced the risks of stoppings of the washer due to breakdowns and makes it possible to
lengthen the lifespan of the equipment.
The washer stores the operational hours in memory. At the end of 900 operating hours, a message on the screen is shown
to indicate that preventive maintenance is required.
The 900 hours are a guide line and it is advisable in the case of less frequent use of the washer to perform the preventive
maintenance on an annual basis
Depending on the countries where the washer is used and the local norms, a higher frequency of preventive maintenance
visits can be necessary.

Getinge Lancer Ultima Series Specifications

General

Brand	Getinge
Model	Lancer Ultima Series
Category	Washer
Language	English