OPERATION INSTRUCTION
MAKE DRIP COFFEE WITH COFFEE BEANS
KNOW YOUR WATER KETTLE
BEFORE THE FIRST USE
1. Open the water tank cover, pour in the cups of water as same
as the cups of coffee you select,If you pour the water amount
more than cups of coffee you select, it will cause weak coffee
since the machine would brew all water in tank. ）
NOTE: 1) The coffee you get would less than the water you pour
in as some water had been absorbed by coffee powder.
2) Never pour hot water, milk, coffee powder or tea into
water tank.
3) Please don’t fill the water tank exceed 10 mark
indicated on water gauge.
2. Press Funnel Key to check the filter is inside of the Funnel
Support.
3. Put proper coffee beans (less than 200g) into Bean Box,
then cover its lid. We suggest not placing too much coffee
bean in Bean Box to avoid the moist of coffee beans.
WARNING: TO PREVENT THE GRINDER FROM BEING BLOCKED,
PLEASE DON’T USE UNROASTED OR DAMPED COFFEE BEANS.
4. Connect the machine to power. The display will show
“12:00” (see “control panel”), and the number will flash,
then press‘HOUR ’and‘ MIN ’button to set local time.
Inspect whether all the accessories are included.
1. Ensure that the machine is at the power-off situation.
2. Press funnel key to take out funnel/filter/funnel cover for clean.
3. Pour drinking water into water tank with some lemon juice if
have. Plug the power outlet, press “GRIND OFF” to cancel
grinding function , then press “ON/OFF” button to start
machine ,let it brew water for 3 times before brewing coffee.
PROGRAM
GRIND OFF
STRENGTH
CONTROL
ON/OFF
POWDER 2-10
HOUR
MIN
To Next Page
Loading...
