GEZE E 260 N4 - User Manual

grn
rot
rot blinkend
Notstrom
steuerzentrale
Em
ergency P
ow
er C
on
trol System
E 260 N
O
K
S
törung
N
etzausfall
O
K
Fault
Pow
er outage
grün
gelb
gelb blinkend
green
yellow
yellow flashing
Installation and Operating Manual
RWA-Emergency Power Control System
E260 N2/N4/N8/N12
GB
Id. No. 113959-04
DE Material-Nr. 104361 IT N. mat. 113961
FR N° de suite 113960

GEZE E 260 N4 Specifications

General

Brand	GEZE
Model	E 260 N4
Category	Control Systems
Language	English

Summary

Operation

Operator Safety and Use

Crucial safety guidelines, intended use, and user obligations for operating the RWA system.

Fire Alarm Procedures

Specific instructions for operating the system during a fire event, including reset.

System Components and Functionality

RWA Switch Operation

Describes the manual alarm trigger and status indicators on the RWA switch.

Fire Alarm and Operational Conditions

Triggering and System Response

Instructions on manual triggering and system actions during a fire alarm.

Alarm Stop and Reset Procedures

Clearing and Resetting Alarms

Methods for clearing alarm conditions and resetting the system.

System Reset Verification

Resetting the Control System

Instructions for resetting the main control system after an alarm.

Confirming Reset Status

Troubleshooting Guide

Common Problems and Solutions

A guide for resolving common system issues indicated by lamps or displays.

Installation and Maintenance Safety

Safety, Personnel, and Compliance

Specifies qualified personnel, safety practices, and regulatory compliance.

Connection Options and Main Circuit Board

Planning and Circuit Board Connections

Drive Direction and Ventilator Groups

Setting Drive Direction

Explains configuring drive direction using Jumper XB1.

Ventilator Group Control

Configuration and Jumper Settings

Configuration Table and Jumpers

Installation Process

Preparation and Mounting

Steps for preparing and physically mounting the RWA system.

Configuration and Electrical Connections

System Configuration Steps

Details the process of configuring the RWA system.

Component Connection and Verification

Connecting System Components

Describes the process of connecting various system components.

Verifying Connections

Power Connection and Safety

Connecting Mains and Batteries

Instructions for connecting the mains power supply and batteries.

Function Testing

System Test Procedures

Procedures for testing all system functions before handover.

Operating States and Fault Interpretation

Displayed System Status

Understanding Status Codes

Troubleshooting Common Issues

Problem Resolution Guide

Testing and Maintenance Schedule

Annual Test Steps and Reporting

Lists the steps for a complete system test and the requirement for a written report.