Need help?Do you have a question about the GF Piping Systems TM 160 ECO and is the answer not in the manual?
Explanation of warning notices, symbols, and their meanings for safe operation.
Details on attention and advice notices used in the manual.
List of abbreviations used in the manual with their meanings.
Specifies the exclusive permitted use of the TM 160/250/315 for PE and PP pipes.
Guidelines for safe operation, including use of original parts and specialist work.
Emphasizes safety awareness, reporting deviations, and specific hazards like cutting or burning.
Instructions for proper disposal of shavings, hydraulic oil, and electronic waste.
Outlines the manual's purpose, target audience, and importance for operation.
Defines the machine's exclusive purpose for fusing thermoplastic pipes and fittings.
States the copyright holder and restrictions on reproduction and distribution of the manual.
Details the information found on the machine's identification tag.
Describes the base machine, hydraulic unit, heating element, electric planer, storage case, and temperature regulator.
Information on packaging methods for transport and delivery.
Precautions for transporting the machine to prevent damage from impact or environmental factors.
Guidelines for storing the machine safely when not in immediate use.
Instructions for checking contents upon receipt and reporting discrepancies or damage.
Overview of fusion process basis, environmental protection, and operator training requirements.
Details on clamping units, pipe positioning, and initial setup for welding.
Explains the principle of heating and fusing pipes without additional materials.
Describes the step-by-step procedure for performing the fusion process.
Instructions for replacing worn components like the heating element coating and planer blades.
Guidance on cleaning hydraulic connections and protecting them when not in use.
Procedures for checking and changing hydraulic oil, including safety precautions.
General| Welding Type | Butt Fusion |
|---|---|
| Operating Pressure | Up to 16 bar |
| Voltage | 230 V |
| Material | PP |
| Diameter Range | 40 mm - 160 mm |
| Power Consumption | 2.1 kW |
| Heating Plate Temperature Range | 180 – 280 °C |
To Next Page
