23
WATER TANK FILLING
Before steamer starts working, the water tank must be filled with the required amount of
water according to the filling level marks on the tank wall:
MAX - maximum water level (2,000 ml)
MIN - minimum water level (800 ml)
After boiling out of all water from the tank
during the operation of the steam cooker:
• Carefully remove the food containers by
holding the container handles;
• Fill the tank with the required amount
of clean water. Be careful as the heating
element at the bottom of the tank is
heated to a high temperature.
NOTE: It is recommended to change the water in the tank after each cooking cycle.
It is also recommended to use filtered water to avoid scale formation.
BEFORE FIRST USE OF STEAM COOKER
• Read all safety instructions carefully before first use.
• Take all steamer parts from the box.
• Remove all packaging materials and labels.
• Carefully inspect the steamer for possible defects, cracks or other damage. If they are
found, do not use a steamer and contact the seller.
• Wipe the steamer base with a damp cloth and then dry it.
• Wash all removable parts of the steamer with detergent water and wait for them to
dry out.
RECOMMENDATION: The first use of the steamer is recommended to be carried out with
empty baskets without food. The recommended first-use cycle is 5-10 minutes.
NOTE: During the first use you may smell a faint smell from the burnout of the
substances left over from the steamer. This is a normal phenomenon that will pass
after several cycles of operation.
MIN
MAX
To Next Page
Loading...