EasyManuals Logo

GGP WBE 0704 User Manual

Default Icon
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Release 00 - 02/2008
Engine WBE 0701-WBE 0704
pag. 13
Service manual
4. ENGINE TUNING AND TESTING
4.1. Operating guidelines
The engine requires a series of interventions (shown in the table below) in order to ensure minimum basic
maintenance.
Operation First 5 hours
Every 5 hours
or daily
Every 25
hours or
every season
Every 50
hours or
every season
Every 100
hours
Check oil level
- - - -
Change oil *
(1)
- - -
Clean mufer and engine
- - - -
Check air cleaner *
(2)
- - - -
Replace air cleaner *
(2)
- - - -
Check spark plug
- - - -
Replace spark plug
- - - -
*
(1)
Replace the oil every 25 hours if the engine is working at full load or at high temperatures.
*
(2)
Clean the air lter more often if the machine is working in dusty areas.
For the operations that are not difcult for the nal
user the assistance centre must maintain the mo-
tor in perfect efciency, in accordance with two
intervention lines:
- Tuning the engine whenever possible.
- Recommending the client a routine maintenan-
ce program at set intervals (e.g. at the end of the
season or before a long period of inactivity).
4.2. Engine tuning program
As part of general engine tuning or any intervention
on the lawn tractor, it is recommended that the Ser-
vice Centre performs a series of operations aimed
at maintaining the engine’s efciency.
Tuning should involve:
- external blowing and cleaning the cylinder
head, cylinder and mufer by removing any
remains of grass and mud;
- checking the oil level, topping up or replacing
parts if necessary;
- inspecting the condition of the starter rope and
checking that it functions correctly [ 6.2];
- cleaning and oiling the air lter [ 5.1];
- emptying and cleaning the fuel tank and che-
cking the breather pipe [ 5.2];
- adjusting minimum and maximum speeds [
8.1 and 8.3];
- inspecting the condition of the spark plug; che-
cking the distance between the electrodes [
10.1];
- tightening the screws [ 11.2];
- functional test [ 4.3].
Should the checks and adjustments fail to achieve
a satisfactory result, refer to chapter [ 15] for
troubleshooting.
<< BACK >>
back to the index

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GGP WBE 0704 and is the answer not in the manual?

GGP WBE 0704 Specifications

General IconGeneral
BrandGGP
ModelWBE 0704
CategoryEngine
LanguageEnglish

Related product manuals