pag. 32
Release 00 - 02/2008
Engine WBE 0701-WBE 0704
Service manual
11.3. Checking the brake
1 - Remove the starter assembly [ 6.1].
2 - Check that the thickness of the friction pad (9)
is not less than 2 mm at its thinnest point.
3 - Make sure that the control lever (10) moves freely
and remove any remains of grass and mud.
4 - Ret the starter assembly [ 6.1].
5 - Start the engine, release the lawnmower lever
and check that the engine stops within 3 secon-
ds.
6 - If it stops after 3 seconds, replace the entire as-
sembly [ 11.4], because the spring or the fric-
tion pad are not capable of ensuring compliance
with braking times.
WARNING! Never return the lawnmower to
yourclientwithoutcheckingbrakeefcien-
cy.
9
10
2
3
To Next Page
Loading...
Need help?
General
