Need help?Do you have a question about the GGP SV200 and is the answer not in the manual?
Addresses issues preventing the engine from starting, covering lawnmower and electrical problems.
Details causes and solutions for engines that start poorly or exhibit kickback.
Covers issues making engine starting difficult and straining the starter rope.
Addresses problems related to the air intake system, such as clogged filters.
Details issues with the carburetor, including dirtiness and poor needle valve seal.
Diagnoses why the engine starts but fails to continue running, covering supply and starting issues.
Identifies causes for reduced engine power, including throttle cable and carburation issues.
Addresses causes of uneven engine operation, such as air leaks or governor issues.
Covers scenarios where the engine reaches excessive rotational speeds due to governor issues.
Diagnoses why the engine fails to stop, relating to brake cable, switch, or clutch lining.
Identifies causes of engine vibration, including unbalanced blades and loose screws.
Addresses stopping system faults that prevent the engine from stopping promptly.
Details causes for excessive oil consumption, such as breather valve or piston ring issues.
Troubleshoots battery issues like poor charging or swelling, related to the alternator.
Explains how to check ignition system performance using spark plug condition and a tester.
Details procedures for setting the coil-to-flywheel air gap and checking coil integrity.
Provides steps for removing and installing a new ignition coil, including air gap adjustment.
Guides on inspecting the engine stop control cable for proper connection and free movement.
Details how to test the microswitch responsible for cutting ignition when the engine is stopped.
Outlines how to check the brake lining thickness and control lever for proper engine stopping.
Provides steps for replacing the complete engine stopping system, including brake and microswitch.
To Next Page
General