EasyManuals Logo

Ghost Acuspot User Manual

Ghost Acuspot
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
MENU
Menu Description Sub-Menu Description
Dxxx Set Address D000 - D512 Setting up a starting DMX address of the xture
IPxx Set IP Code IP.01-IP.64
A1 Auto Mode 1
(Fixed mode)
A1.01-A1.18 Auto mode selection 1 (18 modes available)
A2 Auto Mode 2
(Chase in Jump
mode)
A2.01-A2.32 (Flash) Chase speed adjust
A3 Auto Mode 3
(Chase in Pulse
mode)
A3.01-A3.19 Auto mode selec-
tion 3 (19 modes
available)
A3.01-A3.32
(Flash)
Chase speed
adjust
A4 Auto Mode 4
(Sound mode)
A4.01-A4.19 Auto mode selec-
tion 4 (19 modes
available)
A4.01-A4.04
(Flash)
N/A
A5 Auto Mode 5
(Strobe mode)
A5.01-A5.19 Auto mode selec-
tion 5 (19 modes
available)
A5.01-A5.32
(Flash)
Strobe speed
adjust
Rxxx Red color R000-R255 Intensity adjustment
Gxxx Green color G000-G255 Intensity adjustment
Bxxx Blue color B000-B255 Intensity adjustment
Uxxx White color U000-U255 Intensity adjustment
When the projector is turned on, the characters on the display light up with a solid red dot. When a DMX
signal is present, the red dot ashes.
dxxx - Setting the DMX address
Press MENU to select Dxxx, press Enter to start adjustment. Use the
UP or DOWN keys to set the desired address. Then press ENTER to conrm.
IPXX - Selection of the identifying number
(Used in master slave mode to desynchronize the different projectors)
Press MENU to select IPXX, press Enter.
The display shows “IP01 to IP64”. Select the desired identier with the UP & DOWN keys.
Press ENTER to validate the selection.
AUTOMATIC modes
A1.XX - Selection of static mode
Press the MENU button until A1.XX is displayed. Press ENTER.
The display shows “A1.01 TO A1.18”. Select the desired color with the UP & DOWN keys.
Press ENTER to validate the selection.
A2.XX - Selection of JUMP mode (the colors are linked one after the other)
Press the MENU key until A2.xx is displayed. Press ENTER.
The display shows “A2.01 to A2.32”. Select the JUMP mode with the UP & DOWN keys.
When the display ashes, choose the speed with the UP & DOWN keys.
Press ENTER to validate the selection.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ghost Acuspot and is the answer not in the manual?

Ghost Acuspot Specifications

General IconGeneral
BrandGhost
ModelAcuspot
CategoryProjector
LanguageEnglish

Related product manuals