Page 18
A3.XX - Selection of Pulse mode
Press the MENU key until A3.XX is displayed. Press ENTER.
The display shows “A3.01” to “A3.19”. Select the PULSE mode with the UP & DOWN keys.
When the display ashes, choose the speed with the UP & DOWN keys.
Press ENTER to validate the selection.
A4.XX - Selection of Audio mode
Press the MENU key until A4.XX is displayed. Press ENTER.
The display shows “A4.01” to “A4.19”. Select the mode with the UP & DOWN keys.
Press ENTER to validate the selection.
A5.XX - Strobe mode selection
Press the MENU key until A5.XX is displayed. Press ENTER.
The display shows “A5.01” until “A5.19”. Select the mode with the UP & DOWN keys.
When the display ashes, choose the strobe speed with the UP & DOWN keys.
Press ENTER to validate the selection.
STATIC COLOR mode
RXXX - Selection of the intensity of Red
Press the MENU key until RXXX is displayed. Press ENTER.
The display shows “R000” to “R255”. Select the desired intensity with the UP & DOWN keys.
Press ENTER to validate the selection.
GXXX - Selecting the intensity of Green
Press the MENU key until GXXX is displayed. Press ENTER.
The display shows “G000” to “G255”. Select the desired intensity with the UP & DOWN keys.
Press ENTER to validate the selection.
BXXX - Selection of the intensity of Blue
Press the MENU key until BXXX is displayed. Press ENTER.
The display shows “B000” to “B255”. Select the desired intensity with the UP & DOWN keys.
Press ENTER to validate the selection.
UXXX - Selection of white intensity
Press the MENU key until UXXX is displayed. Press ENTER.
The display shows “U000” to “U255”. Select the desired intensity with the UP & DOWN keys. Press ENTER
to validate the selection.
Note: During an extinction / re-ignition cycle the projector retains its last state.
To Next Page
Loading...
