Giant ANTHEM User Manual

Anthem service manual
 Maestro suspension performance. No brake influence, no pedal kick-back, linear rising rate,
superb traction, and absolute efficient pedaling.
 Rock-solid lateral rigidity which increase sprinting efficiency and tight cornering stability in
racing courses and singletrack.
 The Anthem is built on the basis of our Maestro suspension technology with all the features
that meet today’s XC racing demand.
 Aggressive and agile XC racing geometry
 Lightweight frame design
 Newly designed rear shock. Works well even when set up with little to no sag without
sacrificing the original Maestro suspension performance & characteristics.

Giant ANTHEM Specifications

General

Seatpost	Giant Contact, 30.9mm
Chain	KMC X12
Category	Mountain Bike
Suspension	Full Suspension
Frame Material	Aluminum
Frame	ALUXX SL-Grade Aluminum
Rear Shock	Fox Float DPS
Stem	Giant Contact
Saddle	Giant Contact
Shifters	Shimano SLX
Rear Derailleur	Shimano SLX
Brake Levers	Shimano SLX
Cassette	Shimano SLX
Crankset	Shimano SLX, 32t
Bottom Bracket	Shimano Press-Fit
Rims	Giant AM 29
Hubs	Giant XCT 29 Wheelset, alloy, sealed bearing

Summary

Notice to Authorized Giant Dealers

Spare Parts

Mounting Bolt Torque Settings

Dual Suspension Quick Start Guide

Basic Terms & Shock Set-Up Overview

Explains fundamental terms and provides an overview of shock setup for dual suspension bikes.

Air Shock Set-Up

Details the procedure for setting up the air shock on Maestro suspension bikes for optimal performance.

Setting and Adjusting Rebound Damping

Guides users on how to adjust the rebound damping for proper suspension response and rider comfort.

Front Suspension Travel & Sag Guide

Provides guidance on front suspension travel adjustments and recommended sag settings for optimal performance.

Maintenance

General Maintenance

Covers essential inspection and cleaning practices for suspension components and the bicycle frame.

Replacement of Rear Shock

Step-by-step instructions for safely removing and replacing the rear shock absorber on the bicycle.

Replacement of Rocker Arm

Details the process for dismantling and replacing the rocker arm assembly of the suspension system.

Replacement of Rear Triangle

Provides instructions for removing and reinstalling the rear triangle of the bicycle frame.

Replacement of Joint/Clev

Guides users on how to remove and replace the Joint/Clev linkage component of the suspension.

Replacement of Front Frame

Outlines the steps required to disassemble and replace the front frame section of the bicycle.

Troubleshooting