Giant ANTHEM - Replacement of Rocker Arm; Replacement of Rear Triangle

Replacement of rocker arm
Before dismantling the rocker arm:
 Remove the rear shock.
Step 1:
Loosen the bolt and remove the
rocker arm.
Repeat Step 1 in reverse to reassemble the rocker arm.
Rock arm
Rear Triangle Bolt
Rock arm Bolt
Recommended torque for the rear triangle bolt is 120-150 kgf-cm.
Recommended torque for the rock arm bolt is 90-110 kgf-cm.
Recommended torque for the shock mounting bolt is 90-110 kgf-cm.
Replacement of Rear Triangle
Before dismantling the rear triangle:
 Remove the rear wheel set.
 Remove the crank, chain wheel, chain.
 Remove the rear brake.
 Remove the rear ends, derailleur.
Step 1:
Loosen the rear triangle bolt and
remove the rear triangle.
Repeat Step 1 in reverse to reassemble the rear triangle.
Bolt
Bolt
Recommended torque for the rear triangle bolt is 120-150 kgf-cm.