Gigabyte E152-ZE1 - Installing a Memory; Processor and Memory Module Matrix Table

- 29 -
System Hardware Installation
3-4-2 Installing a Memory
=
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
=
Be sure to install DDR4 DIMMs on this motherboard.
=
Be sure all populated DIMMs have same capacity.
Follow these instructions to install the Memory:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1
2
2
3-4-3 Processor and Memory Module Matrix Table
Processor and Memory Module Matrix Table
1 DIMM
CPU
CPU0
2 DIMMs
CPU0
4 DIMMs
CPU0
8 DIMMs
CPU0
Channel A Channel B Channel C Channel D Channel E Channel F Channel G Channel H

 
   
      