To Next Page

To Previous Page

- 74 -

BIOS Setup

Parameter

Description

Firmware Image Properties

Press [Enter] to view the rmware version information of the device.

NIC Conguration

Press [Enter] to congure advanced items.



Link Speed

– Default setting is Auto Negotiated.



Wake On LAN

– Enables power on of the system via LAN. Note that conguring

Wake on LAN in the operating system does not change the value of

this setting, but does override the behavior of Wake on LAN in OS

controlled power states.

– Options available: Enabled, Disabled. Default setting is Enabled.



LLDP Agent

– Enable/Disable rmware's LLDP Agent.

– Options available: Enabled, Disabled. Default setting is Enabled

Blink LEDs

Identies the physical network port by blinking the associated LED.

Press the numeric keys to adjust desired values (up to 15 seconds).

UEFI Driver