Gigabyte G292-2G0 User Manual

- 82 -
BIOS Setup
5-3-3 UPI Conguration
Parameter
Description
UnCore General
Conguration
Press [Enter] to congure advanced items.

Uncore Status
– Press [Enter] to view the Uncore status.

Link Frequency Select
– Selects the UPI link frequency.
– Options available: 9.6GT/s, 10.4GT/s, 11.2GT/s, Auto. Default setting
is Auto.

SNC (Sub NUMA)
– Enable/Disable Sub NUMA Cluster function.
– Options available: Disable, Enable SNC2 (2-clusters). Default setting
is Disable.

Stale AtoS
– Enable/Disable Stale A to S directory optimization.
– Options available: Disable, Enable, Auto. Default setting is Auto.

LLC dead line alloc
– Enable/Disable ll dead lines in LLC.
– Options available: Disable, Enable, Auto. Default setting is Enable.

Gigabyte G292-2G0 Specifications

General

Model	Gigabyte G292-2G0
Form Factor	2U Rackmount
CPU	Dual Intel Xeon Scalable Processors
Memory	16 DIMM slots
Maximum Memory	4 TB
Storage Bays	12 x 3.5" hot-swappable bays
Networking	2 x 10GbE LAN ports
Remote Management	IPMI 2.0 with dedicated LAN
Power Supply	2 x 1600W redundant power supplies, 80+ Platinum
Operating System Support	Windows Server, Linux distributions