Gigabyte G292-2G0 - Page 85

- 85 -
BIOS Setup
Parameter
Description
Memory RAS Conguration
(continued)

Leaky bucket time window based interface
– Enable/Disable leaky bucket time window based interface.
– Options available: Disabled, Enabled. Default setting is
Disabled.

Leaky bucket low bit
– Congures leaky bucket low bit (1-63).
– Press the <+> / <-> keys to increase or decrease the desired
values.

Leaky bucket high bit
– Congures leaky bucket high bit (1-63).
– Press the <+> / <-> keys to increase or decrease the desired
values.

ADDDC Sparing
(Note)
– Enable/Disable ADDDC Sparing.
– Options available: Disabled, Enabled. Default setting is
Disabled.

Enable ADDDC Error Injection
– Options available: Disabled, Enabled. Default setting is
Enabled.

Column Correction Disable
– Options available: Disable, Enable. Default setting is Disable.

Set PMem Die Sparing
– Options available: Disabled, Enabled. Default setting is
Disabled.

Patrol Scrub
– Options available: Disabled, Enabled, Enable at End of POST.
Default setting is Disabled.
(Note) Advanced items prompt when this item is dened.