Gigabyte G293-Z42-AAP1 - Page 104

BIOS Setup
- 104 -
5-3-3-2-1 DDR Power Options
Parameter Description
DDR Power Options
Power Down Enable
Enable or disable DDR power down mode.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Sub Urgent Refresh Lower
Bound
Species the stored refresh limit required to enter sub-urgent refresh mode.
Urgent Refresh Limit Species the stored refresh limit required to enter urgent refresh mode.
DRAM Refresh Rate
DRAM refresh rate: 1.95us or 3.9us.
Options available: 3.9 usec, 1.95usec. Default setting is 3.9 usec.
Self-Refresh Exit Staggering Options available: Disabled, n=1~9. Default setting is n=9.