Gigabyte G293-Z42-AAP1 - DF Common Options

BIOS Setup
- 95 -
5-3-2 DF Common Options
Parameter Description
DF Common Options
Memory Addressing Press [Enter] for conguration of advanced items.
ACPI Press [Enter] for conguration of advanced items.
Link Press [Enter] for conguration of advanced items.
SDCI Press [Enter] for conguration of advanced items.
DF Watchdog Timer Interval
Congures the Data Fabric watchdog timer interval.
Options available: Auto, 41ms, 166ms, 334ms, 669ms, 1.34 seconds, 2.68
seconds, 5.36 seconds. Default setting is Auto.
Disable DF to external IP
sync ood propagation
Enable/Disable SyncFlood to UMC & downstream slaves.
Options available: Sync ood disabled, Sync ood enabled, Auto.
Default setting is Auto.
Sync ood propagation to DF
Components
Enable/Disable DF Sync Flood propagation.
Options available: Sync ood disabled, Sync ood enabled, Auto.
Default setting is Auto.
Freeze DF module queues on
error
Options available: Disabled, Enabled, Auto. Default setting is Auto.
CC6 memory region encryption
Controls whether or not the CC6 save/restor memory is encrypted.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
CCD B/W Balance Throttle
Level
Options available: Auto, Level 0, Level 1, Level 2, Level 3, Level 4. Default
setting is Auto.