Gigabyte G293-Z42-AAP1 - Broadcom BCM57416 10 GBASE-T Network Connection

BIOS Setup
- 82 -
5-2-18 Broadcom BCM57416 10GBASE-T Network Connection
Parameter Description
Firmware Image Menu
Press [Enter] to view rmware image information.
Device Conguration Menu
Press [Enter] to congure advanced items.

Multi-Function Mode
– Congures the NIC Hardware Mode.
– Options available: SF, NPAR 1.0. Default setting is SF.

SR-IOV
– Enable/Disable Single Root I/O Virtualization.
– Options available: Disabled, Enabled. Default setting is Disabled.

Number of MSI-X Vectors per VF
– Congures the number of MSI-X Vectors per VF (0-128).
– Default setting is 16.

Maximum Number of PF MSI-X Vectors
– Congures the maximum number of PF MSI-X Vectors (0-512 per
controller).
– Default setting is 74.

Energy Efcient Ethernet
– Enable/Disable Energy Efcient Ethernet operation.
– Options available: Disabled, Enabled. Default setting is Disabled.

Operational Link Speed
– Congures the link speed setting to be used as the default link speed
for the selected port.
– Options available: AutoNeg. Default setting is AutoNeg.