Gigabyte G293-Z42-AAP1 - BMC Network Configuration

BIOS Setup
- 154 -
5-6-3 BMC Network Conguration
Parameter
Description
BMC network conguration
Lan Channel 1
Conguration Address source
Selects to congure LAN channel parameters statically or dynamically
(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.
Options available: Unspecied, Static, DynamicBmcDhcp. Default setting
is DynamicBmcDhcp.
Station IP address
Displays IP Address information.
Subnet mask
Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.
Router IP address
Displays the Router IP Address information.
Station MAC address
Displays the MAC Address information.
VLAN Support
Set BMC to enable/disable VLAN support.
Options available: Enabled, Disabled. Default setting is Disabled.
Real-time synchronize BMC
network parameter values
Press [Enter] will set Address source(Static/DHCP) to BMC and then get
Station IP address, Subnet mask and Router IP address from BMC.