Gigabyte G293-Z42-AAP1 - Page 12

- 12 -
Hardware Installation
Expansion Slot Riser Card CRSG622 x 2:
 4 x PCIe x16 (Gen5 x16) FHFL slots, from PEX89048, for GPUs
Riser Card CRSG623 x 2:
 4 x PCIe x16 (Gen5 x16) FHFL slots, from PEX89048, for GPUs
Riser Card CRSG01F x 2:
 2 x PCIe x16 (Gen5 x16) low-prole slots, from CPU_0
- Maximum limitation of GPU card: 285mm (L) x 111.5mm (W) x 39.5mm (H)
- System is validated for population with a uniform GPU model
- Support is not provided for mixed GPU populations
- For the latest GPU cards QVL, please contact your GIGABYTE representative
Internal
Connectors
 1 x TPM header
Front Panel
LED/Buttons
 1 x Power button with LED
 1 x ID button with LED
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
 1 x Reset button
Rear Panel I/O  2 x USB 3.2 Gen1
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 1 x System status LED
Backplane I/O  Speed and bandwidth:
 PCIe Gen5 x4 or SATA 6Gb/s or SAS 12Gb/s
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010