Gigabyte G293-Z42-AAP1 - Page 37

- 37 -
System Hardware Installation
For Slot5/Slot6/Slot7/Slot8/Slot9/Slot10/Slot11/Slot12
Follow these instructions to install the GPU card:
1. [For Slot9/Slot10/Slot11/Slot12] Loosen and remove the two screws securing the PCI cage at the
top of the system.
[For Slot5/Slot6/Slot7/Slot8] Loosen and remove the single screw at the top of the system and the
two screws at the rear of the system securing the PCI cage.
Pull the two plastic handles to lift up the PCI cage from the system.
2. Insert the card into the selected slot. Make sure that the card is properly seated.
3. Secure the GPU cards in place with two screws.
Front
Rear
Boom: Slot8 (PCIE_2_PCIE_4)
Top: Slot5 (PCIE_2_PCIE_1)
Boom: Slot12 (PCIE_3_PCIE_4)
Top: Slot9 (PCIE_3_PCIE_1)
Slot10 (PCIE_3_PCIE_2)
Slot11 (PCIE_3_PCIE_3)
Slot6 (PCIE_2_PCIE_2)
Slot7 (PCIE_2_PCIE_3)
(For Slot9/Slot10/Slot11/Slot12)
1
1
2
2