Gigabyte G34WQC - Turning the Power On;Off

-21
-
LCD Monitor User's Manual
USING THE DEVICE
Turning the Power On/O
Power On
1. Connect one end of the the power cable to a power outlet of the
monitor.
2. Press the Control button to turn on the monitor. The Power LED will
light in white, indicating the monitor is ready to use.
Note: If the power LED fails to turn on even after the monitor is
switched on, check the LED settings in the Settings menu. Refer to Page
34.
Power O
Press the Control button for 2 seconds to turn o the monitor.
Note: When the Main menu appears on the screen, you can also turn o
the monitor by moving the Control button down (
). Refer to page 25.