Gigabyte G482-Z50 - Page 100

BIOS Setup - 100 -
Parameter Description
DDR4 Common Options
(continued)

Common RAS
– Press [Enter] to congure Common RAS options.
• Data Poisoning
• DRAM Post Package Repair
• RCD Parity
• DRAM Address Command Parity Retry
• Max Parity Error Replay
• Write CRC Enable
• DRAM Write CRC Enable and Retry Limit
• Max Write CRC Error Retry
• Disable Memory Error Injection
• ECC Congifuration

Security
– Press [Enter] to congure UMC security options.
• TSME
• Data Scramble
DRAM Memory Mapping
Press [Enter] for more options

Chipselect Interleaving
– Interleave memory blocks across the DRAM chip slects for node 0
– Options available: Disabled/Auto. Default option is Auto.

BankGroupSwap
– Congures the BankGroupSwap. BankGroupSwap (BGS) is a
memory mapping option in AGESA that alters how applications get
assigned to physical locations within the memory modules. When
this option sets to Auto, it is null.
– Options available: Enabled/Disabled/Auto. Default option is Auto.

BankGroupSwapAlt
– Congures the BankGroupSwapAlt.
– Options available: Enabled/Disabled/Auto. Default option is Auto.

Address Hash Bank
– Enable or disable bank address hashing.
– Options available: Disabled/Enabled/Auto. Default option is Auto.

Address Hash CS
– Enable or disable CS address hashing.
– Options available: Auto/Enabled/Disabled. Default option is Auto.

Address Hash Rm
– Enable or disable RM address hashing.
– Options available: Auto/Enabled/Disabled. Default option is Auto.

SPD Read Optimization
– Enable or disable SPD Read Optimization. Enabled = SPD reads
are skipped for Reserved elds and most of upper 256 Bytes,
Disabled = read all 512 SPD Bytes.
– Options available: Auto/Enabled/Disabled. Default option is Auto.
NVDIMM Press [Enter] for more options.