Gigabyte G482-Z50 - UMC Common Options

- 99 - BIOS Setup
5-3-3 UMC Common Options
Parameter Description
UMC Common Options
DDR4 Common Options
Press [Enter] for more options.

Enforce POR
– Press [Enter] to congure the enforcement of Plan Of Record
(POR) which enables / disables restrictions for DDR4 frequency
and voltage programming. Memory speeds will be capped at AMD
guidelines.
– To enable 2 DIMMS per Channel at 3200MHz function, select
Accept at warning message, switch Overclock from Auto to
Enabled, and then set memory speed to 3200Mhz.

DRAM Controller Conguration
– Press [Enter] to congure DRAM controller options.
• DRAM Power Options
• Cmd2T
• Gear Down Mode

CAD Bus Conguration
– Press [Enter] to congure CAD Bus options.
• CAD Bus Timing User Controls
• CAD Bus Drive Strength User Controls

Data Bus conguration
– Press [Enter] to congure Data Bus options.