Gigabyte G492-ZD2 User Manual

BIOS Setup - 44 -
5-1 The Main Menu
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use
arrow keys to move among the items and press <Enter> to accept or enter other sub-menu.
Main Menu Help
The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
Submenu Help
While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the
menu. Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right side of
the submenu.
• When the system is not stable as usual, select the Restore Defaults item to set your system to
its defaults.
• The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS
version.

Gigabyte G492-ZD2 Specifications

General

Form Factor	2U
Memory Type	DDR4 RDIMM/LRDIMM
Storage Support	Up to 12 x 3.5/2.5 inch drives
M.2 Slots	2 x M.2 slots
SATA	SATA 6Gb/s
SAS	SAS support via optional SAS card
Networking	2 x 10GbE RJ45 ports
Power Supply	2 x 2000W redundant power supplies, 80 PLUS Platinum
BMC	IPMI 2.0 compliant
Management	IPMI 2.0