Gigabyte G492-ZD2 - Page 53

- 53 - BIOS Setup
Parameter
Description
Serial Port 1 Conguration
Serial Port
(Note1)
Enable/Disable the Serial Port (COM). When set to Enabled allows you to
congure the Serial port 1 settings. When set to Disabled, displays no
conguration for the serial port.
Options available: Enabled, Disabled. Default setting is Enabled.
Devices Settings
(Note2)
Displays the Serial Port 1 device settings.
Change Settings
(Note2)
Select an optimal settings for Super IO Device.
Options available for Serial Port 1:
Auto
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
Default setting is Auto.
Please note that this item is congurable when Serial Port is set to
Enabled.
(Note1) Advanced items prompt when this item is dened.
(Note2) This item appears when Serial Port is set to Enabled.
5-2-4-1 Serial Port 1 Conguration