System Hardware Installation
- 30 -
4
5
1
2
3
4
Package Type
Carrier Code
Xeon® SP XCCXeon® SP MCCXeon® SP+HBM
E1A
E1C
E1B
Carrier Types used for Package Types
NOTE!
• The carrier code is marked on each carrier and matches a code laser marked on to the IHS(Integrated
Heat Spreader) to ensure the right parts are used together
• When installing the heat sink to CPU, use T30-Lobe driver to tighten 4 captive nuts in sequence as 1-4.
• The screw tightening torque: 8 ± 0.5 kgf-cm.
To Next Page
Loading...
