Gigabyte G593-SD1-AAX1 - Replacing the System Fan Module

System Hardware Installation
- 37 -
3-8 Replacing the System Fan Module
Follow these instructions to replace the fan assembly:
1. Flip and then grasp the handle and simultaneously press the retaining clip on the bottom side of the
fan module in the direction indicated.
2. Pull out the fan module.
3. Reverse the previous steps to install the replacement fan module.
1
2
CAUTION!
Before you remove or install the system fans follow these steps:
• Disconnect all necessary cable connections. Failure to observe these warnings could result in
personal injury or damage to the equipment
Internal System Fan
1. Lift up the fan assembly from the chassis.
2. Reverse the previous steps to install the replacement fan assembly.