Gigabyte G593-SD1-AAX1 - Page 92

- 92 -
BIOS Setup
Parameter
Description
SOCKET RAPL Cong
Press [Enter] to congure advanced items.

PL1 Power Limit
– PL1 Power Limit in Watts. The value may vary from 0 to Fused
Value. If the value is 0, the fused value will be programmed.
– Default setting is 0.

PL1 Time Window
– PL1 value in seconds. The value may vary from 0 to 448.
– Default setting is 1.

PL2 Power Limit
– PL2 Power Limit in Watts. The value may vary from 0 to Fused
Value. If the value is 0, BIOS programs 120% * TDP.
– Default setting is 0.

PL2 Time Window
– PL1 value in seconds. The value may vary from 0 to 0.438.
– Default setting is 0.012.