Gigabyte G593-SD2-AAX1 - Front Panel LEDs and Buttons

System Appearance
- 18 -
2-3 Front Panel LED and Buttons
No. Name Color Status Description
1.
Reset Button Press the button to reset the system.
2.
NMI button
Press the button server generates a NMI to the processor
if the multiple-bit ECC errors occur, which effectively halt
the server.
3.
HDD Status
LED
Green
On HDD locate
Blink HDD access
Amber On HDD fault
Green/
Amber
Blink HDD rebuilding
N/A Off No HDD access or no HDD fault.
4.
System
Status
LED
(Note)
Green Solid On System is operating normally.
Amber
Solid On
Critical condition, may indicate:
System fan failure
System temperature
Blink
Non-critical condition, may indicate:
Redundant power module failure
Temperature and voltage issue
Chassis intrusion
N/A Off
System is not ready, may indicate:
POST error
NMI error
Processor or terminator missing
5.
Power button
with LED
Green On System is powered on
N/A Off System is not powered on or in ACPI S5 state (power off)
6.
ID Button
(Note)
Press the button to activate system identication
1
2
3
4 5 6
(Note) If your server features RoT function, please see the following section for detail LED behavior.