Gigabyte G593-SD2-AAX1 - PCH Configuration

- 91 -
BIOS Setup
5-3-7 PCH Conguration
Parameter
Description
PCH-IO Conguration
SATA And RST Conguration/
SATA Controller And RST
Conguration
Press [Enter] to congure advanced items.

SATA Conguration
– Enable/Disable SATA controller.
– Options available: Enabled, Disabled. Default setting is Enabled.

SATA Mode Selection
– Congures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI, RAID. Default setting is AHCI.

RAID Device ID
(Note)
– Choose RAID Device ID.
– Options available: Client, Alternate, Server. Default setting is Server
.

SATA Port 0/1/2/3/4/5/6/7
– The category identies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
(Note) Only appears when HDD sets to RAID Mode.