Gigabyte G593-SD2-AAX1 - Installing the Memory; Memory Population Table

System Hardware Installation
- 31 -
3-5-2 Installing the Memory
Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module.
Be sure to install DDR5 DIMMs on this motherboard.
Follow these instructions to install the Memory:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1
2
2
3-5-3 Memory Population Table
Type
Ranks Per DIMM
and Data Width
DIMM Capacity (GB)
Speed (MT/s); Voltage (V);
DIMM per Channel (DPC)
1DPCN
1
2DPC
16Gb 24Gb
2
1.1V
RDIMM
SRx8 (RC D) 16GB 24GB
4800 4400
SRx4 (RC C) 32GB 48GB
SRx4 (RC F) 9x4 32GB NA
DRx8 (RC E) 32GB 48GB
DRx4 (RC A) 64GB 96GB
DRx4 (RC B) 9x4 64GB NA
RDIMM 3DS
(4R/8R)x4
(RC A)
2H-128GB
4H-256GB
NA
NOTE:
1.1DPC applies to 1SPC or 2SPC implementations (SPC - Sockets Per Channel)
2. 24Gb XCC only w/ limited congs: 1DPC all DIMM types, 2DPC 96GB only. Only 8 and 16 DIMM congs, no fallbacks.