Gigabyte GA-6PXSV4 - Page 32

Hardware Installation
- 32 -
29) BMC_FRB1 (Force to Stop FRB3 Timer Jumper)
1-2 Close: Normal operation. (Default setting)
2-3 Close: Force to Stop FRB3 Timer.
1
1
1
1
30/31) SATA_DOM0/SATA_DOM1 (SATA DOM Jumpers)
1-2 Close: Enable SATA port 0 and
SATA port 1 DOM support.
2-3 Close: Normal mode. (Default setting)
CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the
jumper is closed and set to 2-3 pins (Normal mode), in order to reduce any risk of hard disk
damage.
SATA_DOM0
SATA_DOM1
Pin No. Denition
1 P5V
2 GND
3 GND