Gigabyte GA-6PXSV4 - South Bridge Configuration

- 59 - BIOS Setup
2-3-2 SouthBridgeConguration
PCH Information:
Name/Stepping Information
Displays the name and stepping information of the south bridge.
 SBChipsetConguration
PCH Compatibility RID
Enable/Disable PCH Compatibility RID support.
Options available: Enabled/Disabled. Default setting is Disabled.
Restore on AC Power Loss
(Note)
Denes the power state to resume to after a sys- tem shutdown that is due to an interruption in AC
power. When set to Last State, the system will return to the active power state prior to shutdown. When
set to Stay Off, the system remains off after power shutdown.
Options available: Last State/Stay Off/Power On. The default setting depends on the BMC setting.
Deep Power off Mode
Enable/Disable Deep Power off Mode.
Options available: Enabled/Disabled. Default setting is Disabled.
SCU devices
Enable/Disable Patsburg SCU devices.
Options available: Enabled/Disabled. Default setting is Disabled.
(Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the
last power state.