- 39 - BIOS Setup
2-2-2 Trusted Computing
TPM Support
Select Enabled to activate TPM support feature.
Options available: Enabled/Disabled. Default setting is Enabled.
TPM State
(Note)
Select Enabled to activate TPM State function.
Options available: Enabled/Disabled. Default setting is Enabled.
Pending Operation
(Note)
Determine the action when operation is pending.
Options available: None. Default setting is None.
Current Status Information
Display current TPM status information.
(Note) This item appears when the TPM module is attached.
To Next Page
Loading...
