BIOS Setup
35
Integrated Peripherals
Figure 5: Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
Integrated Peripherals
IDE1 Conductor Cable Auto
IDE2 Conductor Cable Auto
On-Chip IDE Channel 0 Enabled Item Help
On-Chip IDE Channel 1 Enabled
Init Display First PCI Slot Menu Level
Enhance ATAPI Performance Disabled
Onboard FDD Controller Enabled
Onboard Serial Port A Auto
Onboard Serial Port B Auto
Serial Port B Mode Normal
Duplex Mode Half
Onboard Parallel Port 378/IRQ7
Onboard Parallel Mode ECP
ECP Mode Use DMA 3
Parallel Port EPP Type EPP 1.9
Onboard Legacy Audio Enabled
Sound Blaster Disabled
SB I/O Base Address 220H
SB IRQ Select IRQ5
SB DMA Select DMA1
MPU-401 Disabled
MPU-401 I/O Address 330-333H
Game Port (200-207H) Enabled
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
To Next Page
Loading...
