Gigabyte GA-6VEM - PnP;PCI Configurations

BIOS Setup
45
PnP/PCI Configurations
Figure 7: PnP/PCI Configurations
 Reset Configuration Data
Disabled Disabled this function. (Default value)
Enabled Enable clear PnP information in ESCD.
 Resources Controlled by
Manual User can set the PnP resource (I/O Address, IRQ & DMA
channels) used by legacy ISA DEVICE.
Auto(ESCD) BIOS automatically use these PnP rescuers. (Default value)
 IRQ Resources ( 3,4,5,7,9,10,11,12,14,15 )
PCI/ISA PnP The resource is used by PCI device.
Legacy ISA Set the resource to reserved.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
PnP/PCI Configurations
Reset Configuration Data Disabled Item Help
Menu Level
Resources Controlled By Auto (ESCD)
IRQ Resources Press Enter
DMA Resources Press Enter
PCI1 IRQ Assignment Auto
PCI2 IRQ Assignment Auto
PCI3 IRQ Assignment Auto
: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults