18
English
GA-7GEWH-RH Motherboard
3 ) ATX2 (4-pin ATX +12V Power connector)
This connector (ATX_12V) supplies the CPU operation voltage (Vcore).
If this "ATX_12V connector" is not connected, system cannot boot.
Pin No. Definition
1 GND
2 GND
3 +12V
4 +12V
3
1
4
2
4 ) IDE1 (IDE cable connector)
Please connect first harddisk to IDE1. The red stripe of the ribbon cable must be the same side with
the Pin1.
2
1
39
40
To Next Page
Loading...
