60
BIOS Setup
Post Error Pause
If this item is set to enabled, the system will wai for user intervention on critical POST errors.
If this item is disabled, the system will boot with no intervention if possible.
Enabled Enable Post Error Pause. (Default setting)
Disabled Disable this function.
After Power Failure
This option provides user to set the mode of operation if an AC / power loss occurs.
Power On System power state when AC cord is re-plugged. (Default setting)
Stay Off Do not power on system when AC power is back.
Last State Set system to the last sate when AC power is removed. Do not power on
system when AC power is back.
FAN Speed Control
Enabled Enable FAN Speed Control. (Default setting)
Disabled Disable this function.
To Next Page
Loading...
