Gigabyte GA-7GEWH-RH - Serial Ata

49
GA-7GEWH-RH Motherboard
Route Port 80h cycles to
Set route port 80h cycles to either PCI or LPC bus.
PCI Set Route Port 80h I/O cycles to the PCI bus. (Default setting)
LPC Set Route Port 80h I/O cycles to the LPC bus.
Parallel ATA
Enabled Enable Parallel ATA. (Default setting)
Disabled Disable the device.
Serial ATA
Enabled Enables on-board serial ATA function. (Default setting)
Disabled Disables on-board serial ATA function.
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto Auto detected. (Default setting)
Serial ATA Set Native mode to Serial ATA.
SATA Controller Mode Option
Compatible Mode SATA and PATA drives are auto-detected and placed in
Legacy mode. (Default setting)
Enhanced Mode SATA and PATA drives are auto-detected and placed in
Native mode.
Note: Pre-Win2000 operating system do not work in Enhanced mode.