47
GA-7GEWH-RH Motherboard
Serial Port B
This allows users to configure serial prot B by using this option.
Enabled Enable the configuration (Default setting)
Disabled Disable the configuration.
Base I/O Address/IRQ
3F8/IRQ4 Set IO address to 3F8.
2F8/IRQ3 Set IO address to 2F8. (Default setting)
3E8/IRQ4 Set IO address to 3E8.
2E8/IRQ3 Set IO address to 2E8.
Parallel Port
This allows users to configure parallel port by using this option.
Enabled Enable the configuration. (Default setting)
Disabled Disable the configuration.
Mode
This option allows user to set Parallel Port transfer mode.
Bi-directional Use this setting to support bi-directional transfers on the parallel
port. (Default setting)
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
Base I/O Address
378 Set IO address to 378. (Default setting)
278 Set IO address to 278.
Iterrupt
IRQ5 Set Interrupt as IRQ5.
IRQ7 Set Interrupt as IRQ7. (Default setting)
To Next Page
Loading...
