IDE RAID Drives Configuration (GigaRAID)- 15 -
Figure 19
Figure 18
Step 3:
Double-click MENU.exe. An MS-DOS prompt screen similar to Figure 18 below will appear.
Step 4:
Insert an empty floppy disk. Press 2 to select the 2)GIGARAID item. Then it will take about one minute
to copy the GigaRAID driver from the motherboard driver CD to the floppy disk.
Step 5:
Press 0 to exit when the procedure is complete (Figure 19). You have copied the IDE RAID driver
sucessfully.
To Next Page
Loading...
