Gigabyte GA-8GPNXP Duo - Feature Summary

GA-8GPNXP Duo Motherboard - 10 -
English
CPU  Supports the latest Intel
®
Pentium
®
4 LGA775 CPU
 Supports 800/533MHz FSB
 L2 cache varies with CPU
Chipset  Northbridge: Intel
®
915P Express Chipset
 Southbridge: Intel
®
ICH6R
Memory  4 DDR DIMM memory slots (supports up to 4GB memory)
(Note 1)
 Supports 2.5V DDR DIMM
 Supports dual channel DDR 400/333 DIMM
 2 DDR II DIMM memory slots (supports up to 4GB memory)
(Note 1)
 Supports dual channel DDR II 600
(Note 2)
/533/400 DIMM
 Supports 1.8V DDR II DIMM
(Note: Mixed mode, populating DDR and DDR II memory modules
simultaneously is not supported.)
Slots  1 PCI Express x 16 slot
 3 PCI Express x 1 slots
 2 PCI slots
IDE Connections  1 IDE connection (UDMA 33/ATA 66/ATA 100), allows connection of 2
IDE devices(IDE)
 2 IDE connection (UDMA 33/ATA 66/ATA 100/ATA 133), compatible with
RAID, allows connection of 4 IDE devices(IDE2,IDE3)
FDD Connections  1 FDD connection, allows connection of 2 FDD devices
Onboard SATA  4 Serial ATA connections
Peripherals  1 parallel port supporting Normal/EPP/ECP mode
 1 serial port (COMA)
 8 USB 2.0/1.1 ports (rear x 4, front x 4 via cable)
 3 IEEE1394b ports (requires cable)
 1 front audio connector
 1 IR connector
 1 PS/2 keyboard port
 1 PS/2 mouse port
Onboard LAN  Onboard Marvell 8001 chip (10/100/1000 Mbit) (LAN1)
 Onboard Broadcom 5751 chip (10/100/1000 Mbit) (LAN2)
 2 RJ 45 port
(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage
and therefore the actual memory size is less than the stated amount.
For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system startup.
(Note 2) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB
processor and overclock in BIOS.
1-2 Feature Summary